ACUMIX, Inc. "Acccurate Mixing That's Centered Around You"
ACUMIX Home Page ACUMIX Contact Information Portable Mixers About ACUMIX, Inc. ACUMIX Order Information ACUMIX Site Map
Bung Mounted Mixer Designs
Economy Direct Driven Portable Mixer Designs.
Economy Gear Driven Portable Mixers
Top Entering Mixers
Right Angle Agitators Agitation
Quick E_Quote
Electronic Brochures or Catalogs of Equipment
Mail ACUMIX Catalog Request
Mixing Applications & Markets



Economy Bung Mounted Gear Driven Portable Mixer - Specs

Economy Gear Driven Bung Mounted MixersEconomy Bung Mounted Gear Driven Portable Mixers
ACUMIX Industrial  Mixers Model AQBE is a high quality line of Heavy Duty Direct Driven Bung Mounted Portable Mixers available with maximum effect folding propellers typically used in 55 gallon drum applications (specifications below).  

Today's economy gear driven swivel mounted portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.
Pricing Matrix: Economy Gear Driven Bung Mounted Mixers: SG<1.9, Vis < 2,500 cp.
Pricing Matrix: Economy Gear Driven Bung Mounted Mixers: SG < 1.15, Vis < 5,000 cp.
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

ACUMIX Mixer Model AQBE is our economy top entering bung mounted gear driven portable mixer with heavy gage high strength cast iron housing.   Our rugged 2" NPT Bung assembly is constructed of corrosion resistant 316L {Low Carbon} Stainless Steel (316SS Hardware).  The gearbox is equipped with a high strength single helical gear reduction with a minimum AGMA Service Factor of 1.5 based on motor nameplate.  The removable agitator/gearbox coupling is constructed of 316LSS stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  1750 RPM motor options include both 115/208-230 Volt, 1 phase and 208-230/460 Volt 3 Phase, TEFC (Totally Enclosed Fan Cooled) designs.  XP (Explosion Proof - Class I, Group D, Class II, Group F&G, T3C) and intrinsically safe variable speed Air Motors are also available.  Variable speed motor options are available upon request. The agitator shaft is measured from the mixers mounting and is supplied with maximum effect folding propeller(s) as specified in the pricing table.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel (with 316SS hardware).    Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  See pricing link above.

Hit Counter01.04.09

ACUMIX, Inc.
PO Box 6867 | 200 S. 18th Street | Harrisburg, PA 17112
Phone: 800-683-2011, 717-540-9738 | Fax: 888-259-5499 | ACUMIX web site: www.acumix.org