Bung Mounted Mixer Designs
Economy Direct Driven Portable Mixer Designs.
Economy Gear Drive Portable Mixer
Top Entering Mixers
Right Angle Agitators Agitation
Quick E_Quote
Electronic Catalog
Mail ACUMIX Catalog Request
Mixing Application
Mixing Applications & Markets



Economy Gear Driven Fixed Plate Mounted Portable Mixers Model AQOE - Specifications 

Economy Gear Driven Fixed Flanged Plate Mounted MixersACUMIX Industrial Mixers manufactures economy fixed plate mounted gear driven portable mixers.  We also have numerous other open and closed tank (hermetically seals and pressurized} mixer design mounting options available.  Please reference our mixer specifications and pricing matrix below.  

Today's gear driven portable mixing applications demand durable process equipment accompanied by total support for your mixing needs.  We offer a complete line portable mixers.   We provide superior materials of construction throughout to give each mixer the strength & reliability that ensures the performance to the standards of each Industrial Portable Mixer design.

Pricing Matrix: Economy Gear Driven Fixed Flanged Plate Mounted Mixers
Mixer Selections (Sizing): Viscosity vs. Tank Volume, etc.

ACUMIX Mixer Model AQOE is our economy gear driven top entering open tank fixed mounted mixer.  The motor coupling is located below the mixers mounting base and  will be constructed of 316L {Low Carbon} stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation for mounting to a suitable horizontal support structure such as spanning beams or a tank lid assembly.  The cast iron  gearbox with commercially standard paint features a 98% efficient high strength single helical gear reduction with a minimum AGMA Service Factor of 1.5 based on motor nameplate.  Please note that our gear reduction is not made from inefficient "soft wear" worm gearing, is not a low quality planetary gear.  The removable agitator/gearbox coupling is constructed of 316LSS stainless steel for precise alignment to minimize shaft deflection and to enable ease of installation.  Please note that non-aligning, non-concentric split couplings are not used.  Standard motor options include: 1750 RPM's both 115/208-230 Volt, 1-phase, 60 hertz and 208-230/460 Volt, 3-Phase, 50/60 Hertz, TEFC (Totally Enclosed Fan Cooled) designs with commercially standard paint.  Available motor upgrades or options include:  

Food grade” high pressure wash down all stainless or with electrostatically white epoxy finish, with tropicalized class F insulation, TENV  or TEFC, and a 1.15 Service Factor  

Explosion Proof - Class I, Group D or C&D, Class II, Group F&G, T3C)  

Intrinsically safe {suitable for explosion proof environments) variable speed rotary vane or piston type air motors totally enclosed with air muffler.

AC & DC variable speed motor options.

The agitator shaft is measured from the mixers mounting and is supplied with maximum effect folding propeller(s) as specified in the pricing table.  All wetted parts will be constructed of 316L {Low Carbon} Stainless Steel (with 316SS hardware).    Each mixers nameplate will specifically state, "Manufactured in USA" and will be built with pride and dedication.  Motor/gearbox chemical resistant paint optional upgrade is available upon request.  See pricing link above.

02.13.17

ACUMIX, Inc.
Mailing
| PO Box 6867  | Harrisburg, PA 17112-0867
Sales & Engineering Office
| 805 Harrogate Dr  | Harrisburg, PA 17111
Phone: 800-683-2011 (Sales Only)  717-540-9738
| Fax: 419-616-1524 or 630-869-8821| ACUMIX web site: www.acumix.org